Re: Another gamedoctor 7 problem!!

[ Post a new reply ] [ Back to the message board ]

This message was posted by punisher, posted on January 30, 2002 at 06:13:05 coming from 195.92.168
Mood of this message:

This message is a reply to Re: Another gamedoctor 7 problem!! posted from Arakon posted at January 29, 2002 at 17:34:14
> > Having said all that, im having a few problems with my gamedoctor 7. Can anyone who uses the program TSF3, tell me what the procedure is for uploading to your copier.
> > See, when i plug my gd7 in to my pc via parallel cable (male-male), isn't there suppose to be a message on the tv screen that says, "connecting". Well this dosn't happen on my gd7.
> > When i switch the snes on, i just get the usual 3,2,1 countdown, followed by the message, "insert disk", as if it wasn't connected to anything.
> > Is my copier broken, or am i missing something?

> first of all, do you have the right cable? it has to be a 1:1 straight through cable, with no crossed pins (not a laplink cable!). also, make sure your printer port mode is set to EPP, and if that fails, SPP in the BIOS.

Yep, well there's the problem right there. Im using a Laplink cable! The cable i need is a switchbox cable right?
The Gd dosn't even recognise my cable.
Guess i should have paid more attention to the previous posts.
Cheers Arakon.

Responses to this messages:

Post a Followup

Name
E-Mail
Subject
Message	> > > Having said all that, im having a few problems with my gamedoctor 7. Can anyone who uses the program TSF3, tell me what the procedure is for uploading to your copier. > > > See, when i plug my gd7 in to my pc via parallel cable (male-male), isn't there suppose to be a message on the tv screen that says, "connecting". Well this dosn't happen on my gd7. > > > When i switch the snes on, i just get the usual 3,2,1 countdown, followed by the message, "insert disk", as if it wasn't connected to anything. > > > Is my copier broken, or am i missing something? > > first of all, do you have the right cable? it has to be a 1:1 straight through cable, with no crossed pins (not a laplink cable!). also, make sure your printer port mode is set to EPP, and if that fails, SPP in the BIOS. > Yep, well there's the problem right there. Im using a Laplink cable! The cable i need is a switchbox cable right? > The Gd dosn't even recognise my cable. > Guess i should have paid more attention to the previous posts. > Cheers Arakon. > >
Optional Link URL
Optional Link Title
Optional Image URL

Please pick a mood for your message:
Please pick a mood for your message: