Re: GDSF7 PC Transfer Problems

[ Post a new reply ] [ Back to the message board ]

This message was posted by Arakon, posted on September 22, 2001 at 10:38:22 coming from 217.86.7
This message is a reply to GDSF7 PC Transfer Problems posted from WarDogz posted at September 22, 2001 at 09:48:44
> Does the 7.0 Bios support PC to GD transfer? I have been up all night trying to get it to work. Its driving me NUTS! Here's a run down of what I've tried.

> I have a "PC to PC file Transfer cable"
> is this the right cable?

you need a 1:1 cable.

> Have the Port set to 378 IRQ 7 "SPP"

use EPP.

> Tried TSF2, TSF3, GTOOL, and SnesTool in both Windows and pure Dos.

> Tried starting transfer before and after I turn on the snes, Go to "Load Game" and it just sits there saying "Insert Disk Please"

> Unit passes all self tests and copies and plays games fine to/from the floppy.

> I went as far as to check each pin from the PC end of the cable to were the solder joints are in the GDSF7 to make sure the socket wasnt worn out.

> I hope its the Bios, user error or a wrong cable, I picked this unit over a Super UFO solely for the PC transfer. I dont wanna change floppy's :-)

Responses to this messages:

Post a Followup

Optional Link URL
Optional Link Title
Optional Image URL
Please pick a mood
for your message: