Re: Sorry, my english is bad... I'll try again ;-)

[ Post a new reply ] [ Back to the message board ]

This message was posted by Saeba, posted on September 09, 2001 at 09:16:06 coming from 62.82.172
This message is a reply to Re: About SWCDX and SWCDX2... posted from The Dumper posted at September 08, 2001 at 20:43:00

> I'm not sure what you're talking about. With the DX2 you don't need the ROMs anymore. You can dump the ROMs on a cart to your PC.

> There was another post implying you needed a BIOS swap but you don't need that, all you need is the NTSC CIC chip installed in U10.

What I mean is... I can get that NTSC CIC chip from a SWC DX copier and from my parodius3 (last one I won't do). But, can I get the content of that chip on the net (the dump of that NTSC CIC chip), then I could create my own chip with a eeprom saver or something like that?

Thanks again!

Responses to this messages:

Re: OK, I got it now -- here's my recommendation. The Dumper 10:54:42 09/09/01 (1) response
- Re: OK, I got it now -- here's my recommendation. Saeba 11:03:54 09/09/01 (0) responses

Post a Followup

Name
E-Mail
Subject
Message	> > > I'm not sure what you're talking about. With the DX2 you don't need the ROMs anymore. You can dump the ROMs on a cart to your PC. > > There was another post implying you needed a BIOS swap but you don't need that, all you need is the NTSC CIC chip installed in U10. > What I mean is... I can get that NTSC CIC chip from a SWC DX copier and from my parodius3 (last one I won't do). But, can I get the content of that chip on the net (the dump of that NTSC CIC chip), then I could create my own chip with a eeprom saver or something like that? > Thanks again!
Optional Link URL
Optional Link Title
Optional Image URL

Please pick a mood for your message:
Please pick a mood for your message: