no, I have it right here, I see four chips, and none are dsp

[ Post a new reply ] [ Back to the message board ]

This message was posted by Mike, posted on August 29, 2001 at 18:41:23 coming from 63.162.22
Mood of this message: Mood of this message
This message is a reply to Re: Wrong Mike Mario Rpg uses both sa-1 and dsp just open the cart you'll see posted from Reek Master of Roms posted at August 29, 2001 at 04:28:27
I see the rom chip "U1 MASKROM"
save ram chip "U2 SRAM"
the sa-1 "U3 SA1"
and some other tiny 8 pin chip "U4 MM1026AF"

I have like six different dsp carts, and the dsp chip is similar if not identical in appearance in all of them (except the dsp-2 in F1ROC, which looks like ST010 or ST011 on that page.)

I also just opened oshaberi parodius, and it has a very similar board design with the same 4 chips.

One last bit of proof (other than scanning mine) is the picture here, scroll down, it's the one that says sa-1. You can tell that's a scan of the japanese mario RPG because the rom chip says ARWJ-0, mine says ARWE-0. You can look at the dsp pic, that's what all the dsp chips I've seen look like (the top chip.)

I hope I've been able to prove myself not wrong. I hate seeing wrong info spread, especially about snes and snes special chips :)


Responses to this messages:


Post a Followup

Name
E-Mail
Subject
Message
Optional Link URL
Optional Link Title
Optional Image URL
Please pick a mood
for your message: