Re: RGB Output on Super Famicom

[ Post a new reply ] [ Back to the message board ]

This message was posted by Mark, posted on August 10, 2001 at 14:13:47 coming from 213.122.167
This message is a reply to Re: RGB Output on Super Famicom posted from Bero posted at August 10, 2001 at 13:38:07
> My cable is like this:

> °-> unused

> +-------------------------------+
> | 2 ° 6 8 ° ° ° 16 ° 20 /
> |° ° ° 7 ° 11 ° 15 17 ° |
> +------------------------------+

> 2. Audio Right
> 6. Audio Left
> 7. RGB Blue
> 8. RGB Auto Switch
> 11. RGB Green
> 15. RGB Red
> 16. Blanking Signal
> 17. Composite Video Ground
> 20. Composite Video

> So if I well understand I must put capacitors on pins 7,11,15 and 20 and leave the others?

Yes. As I said though, I strongly recommend you buy a SCART plug to SCART socket cable (most electrical stores should sell these) and install the capacitors in that, rather than modifying your original Nintendo cable.
If you have a problem, you can additionally disconnect pin 8.

By the way: I want to obtain a French SNES SCART cable which is made by Nintendo. If you have a spare or are able to get one, please contact me!

-- Mark

Responses to this messages:

Re: RGB Output on Super Famicom Bero 17:36:34 08/10/01 (1) response
- Re: RGB cable, I want one too Graye 05:32:30 08/11/01 (0) responses

Post a Followup

Name
E-Mail
Subject
Message	> > My cable is like this: > > °-> unused > > +-------------------------------+ > > \| 2 ° 6 8 ° ° ° 16 ° 20 / > > \|° ° ° 7 ° 11 ° 15 17 ° \| > > +------------------------------+ > > 2. Audio Right > > 6. Audio Left > > 7. RGB Blue > > 8. RGB Auto Switch > > 11. RGB Green > > 15. RGB Red > > 16. Blanking Signal > > 17. Composite Video Ground > > 20. Composite Video > > So if I well understand I must put capacitors on pins 7,11,15 and 20 and leave the others? > Yes. As I said though, I strongly recommend you buy a SCART plug to SCART socket cable (most electrical stores should sell these) and install the capacitors in that, rather than modifying your original Nintendo cable. > If you have a problem, you can additionally disconnect pin 8. > > By the way: I want to obtain a French SNES SCART cable which is made by Nintendo. If you have a spare or are able to get one, please contact me! > > -- Mark
Optional Link URL
Optional Link Title
Optional Image URL

Please pick a mood for your message:
Please pick a mood for your message: