> > > I have a PC-Linker and it works great. First, you'll probably have to remove the screws from the parallel connector to make it fit into your PC's parallel port.
> > > Next, start up the linker program on your PC. Put a GB ROM into the list, and then hook up the PC-Linker to your Gameboy. (Make sure it is turned off). Now, press Start (or whatever) and it'll say "Waiting..."
> > > At this point, turn on your Gameboy. It'll first erase the flash RAM, and then the download to the cart will begin. If you get errors, you'll either have to adjust the delay time or select the correct parallel port for your PC.
> > > (Oh, and I've noticed that some GBC games don't work on the PC-Linker. I've managed to fix this. If you want info on how to do it, post to this board again.)
> >
> > Thanks alot for your help, but my linker still isn't working! Maybe its my computer settings, do you have any idea what they should be or what yours are set to? Thanks again for helping me out with this, I've been searching for days and I just want to get this thing working!
> Yes, then it could be your computer. Go to your Control Panel -> System -> Device Manager -> Ports (COM & LPT) -> ECP Printer Port (LPT1) And click on properties. If the printer port isn't ECP, that might be the problem. Anyway, if it is ECP, go to the Resources tab, which'll give you a memory range. The current parallel port that you are using (LPT1,2,3, whatever) should be the same one as is set in the PC-Linker program. My input/output range is 0378-037A, so I would set that in the PC-Linker program as well (LPT1).
> Also, what speed is your PC? Mine is a 266, so a Delay setting o
Its still not working, but I did notice something you said that might help. My setting is on 0378-037F instead of 037A. Do you know if theres anyway to change that or what can be done to make it so it works? Sorry to bother you like this but I really do appreciate all your help